Floor Installation Checklist

12 Floor Installation Checklist You Must Know

(Last Updated On: July 6, 2022)

When you are considering a floor installation, it is important to have a checklist of items that should be taken into account. This checklist will help ensure that the project goes smoothly and that any potential problems are detected and corrected early. 

1. Remove All Breakables

Floor installation is a huge project that can take many days to complete. There are a lot of steps to follow and things to remember in order to make sure the floor is installed correctly and lasts for years.

One of the most important things to remember is to remove all breakables from the room before beginning installation. This includes lamps, knick-knacks, plants, and any other items that could be damaged during installation. Another thing to keep in mind is that the flooring material itself can be dangerous.

For example, if you are installing hardwood floors, make sure you wear protective gear, such as gloves and a mask. The same goes for tile installation – be sure to use caution when working with sharp blades.

2. Determine Who Removes Furniture, Appliances and Adds Subfloor

When you are getting ready to install a new floor, one of the first decisions you have to make is who will be removing the furniture, appliances, and adding the subfloor. This decision can be based on several factors, such as cost and availability. If you are comfortable doing some of the work yourself, then you may be able to save some money by doing it yourself. However, if you don’t feel comfortable doing any of the work, then you will need to hire a professional.

One factor to consider is how much work needs to be done. If there is a lot of furniture that needs to be removed, or if there is a lot of prep work that needs to be done before the flooring can be installed, then hiring a professional may be your best option. Another factor to consider is how accessible the installation area is.

3. Disconnect Gas Appliances and Electronics

When you have a new floor installed, there are a few key things you need to do in order to ensure its longevity. One of the most important is to disconnect all gas appliances and electronics. This includes your stove, oven, dryer, furnace, and water heater. Not doing so can result in damage to your new flooring as well as these appliances.

Read More:   A Guide to Picking the Right Color Palette for Your Home

In addition to disconnecting appliances and electronics, you’ll also want to move furniture and other items away from the edges of the room. This will help the installers have easy access to the entire floor and will make it easier for you to move around once the job is done. Finally, make sure you have enough protection for your floors during the installation process. 

4. Determine New Floor Height

Determine New Floor Height

The installation of a new floor is a big job that can be daunting for the uninitiated. By following a checklist, however, the process can be made much easier. The first step is to determine the height of the new floor.

This can be done by measuring from the subfloor to the finished floor or to the underside of an existing countertop or other obstruction. If there is no existing finished floor or obstruction, then a level should be used to find the highest point on the subfloor. 

5. Clean Out Closets and Storage Areas

Spring is the time for cleaning and getting organized. One of the best ways to start your spring cleaning is to clean out your closets and storage areas. This will help you get rid of clutter and make room for new items.

Before you start cleaning, make sure you have a floor installation checklist. This will help you stay organized and avoid damaging your floors.

6. Provide Dust Control

There are a few key things to remember when installing floors, which will help keep the dust down. First, use a good quality adhesive and follow the manufacturer’s instructions. Second, make sure the surface is clean and free of debris before installation. Third, use a damp cloth to wipe up any excess adhesive or dust. Finally, wait for the adhesive to dry before walking on the floor.

7. Remove the Doors 

Remove the Doors 

When you’re installing a new floor, there are a few things you can do to make the process go more smoothly. One of the most important is to remove the doors. This will give you more space to work, and it will also make it easier to move the furniture around.

Read More:   15 Essential Food Storage Organizer List For Smart Housekeeper

Before you start, make sure you have all of the supplies you need. You’ll need a tape measure, a saw, a drill, and a level. If you’re not comfortable using power tools, ask someone else to help you with those parts of the project.

Once you have everything ready, start by measuring the door opening. You’ll need to know how wide and how tall the opening is before you can cut the boards. Use a saw to cut the boards to size, making sure they’re all the same length.

8. Remove the Baseboards

Removing the baseboards is a task that many homeowners undertake when installing a new floor. Baseboards can be removed with a few simple tools and a little bit of effort. Here is a quick installation checklist to help you remove your old baseboards and install your new floor:

  • Remove any nails or screws from the baseboard using a screwdriver or claw hammer.
  • Use a pry bar to gently lift the baseboard away from the wall.
  • If the baseboard is glued to the wall, use a chisel to score the adhesive and then pry the board away from the wall.
  • Clean any debris or old adhesive from the wall and then replace the baseboard, securing it in place with nails or screws.

9. Thoroughly Clean All Floors

Floors are often one of the most overlooked areas when it comes to cleaning, but they are one of the most important. Not only do floors need to be clean for appearance sake, but they also need to be clean for health reasons. Dust and dirt can build up over time and create a breeding ground for bacteria and other allergens.

The best way to clean floors is with a thorough, regular cleaning routine. This includes sweeping, mopping, and vacuuming. It’s also important to pay special attention to areas that tend to get dirty more easily, such as entryways and kitchen areas.

In addition to a regular cleaning routine, it’s also important to do a deep clean every once in a while. This involves using a stronger cleaner and scrubbing all the surfaces of the floor.

10. Prepare the Subfloor

Prepare the Subfloor

The subfloor is the foundation of your floor installation and should be given the attention it deserves. To ensure a successful installation, make sure the subfloor is clean, dry, and in good condition. Check for any damage and repair as needed.

If installing over concrete, make sure the surface is smooth and level. If installing over plywood or OSB, use a straight edge to check for any bows or warps. The subfloor should also be square to the walls and adjacent rooms.

Read More:   Useful Tips for Selling Your House the Right Way

If you are installing a floating floor system, you may not need to attach the subfloor to the joists. However, if you are using a glued down or nailed down floor system, you will need to fasten the subfloor to the joists. Use construction adhesive and nails or screws to attach the subfloor.

11. Prepare a Cutting Area

When you’re installing a new floor, you’ll need to have a dedicated cutting area set up. This area should be clean and free of debris, and it should be large enough to accommodate the size of the flooring you’re installing. Here are some tips for preparing your cutting area:

  • Make sure the floor is level and free of bumps or cracks.
  • If possible, remove all furniture from the room and put down a drop cloth to protect the flooring underneath.
  • If you’re using a saw to cut the flooring, make sure you have a sturdy work surface to place it on.
  • Have plenty of supplies on hand, including a tape measure, chop saw blade, straight edge, and sharp utility knife.
  • Make sure there is adequate lighting in the room so that you can see what you’re doing.

12. Secure Your Pets

One of the best ways to keep your pet safe is to make sure that their environment is secure. This means taking the time to install a floor installation checklist that will keep them from slipping and getting injured. Most pets are active and love to run around, so it’s important to make sure that their play area is as safe as possible. Here are some tips for installing a floor installation checklist:

  • Make sure that all edges are smooth and without any protruding nails or screws.
  • If you have a puppy or kitten, be sure to cover any sharp edges with a soft material like foam or felt.
  • Place rugs in areas where your pet tends to slip, such as near stairs or entrances.
  • Check for any holes or cracks in the flooring and repair them as necessary.

Final Thought:

In conclusion, following a floor installation checklist can ensure that your floor is installed correctly and will last for years. By taking your time and being careful, you can avoid costly mistakes and have a beautiful floor that you can be proud of.

Scroll to Top