Furnace Installation Scarborough

Furnace Installation Process From Start to Finish

(Last Updated On: June 24, 2022)

When you are in the market for a new furnace, it is important to know what the installation process will entail. There are a few steps that must be taken in order to ensure that your new furnace is installed properly and functions correctly from the start.

My life experience has shown me that if you can break down undertakings into fundamental phases, you can master them. That is the difference between a wise and a smart person.

After that, let’s have a look at how to execute a smart furnace installation in Scarborough, whether it’s a new or old furnace. I’ve broken the procedure down into 13 easy steps. Will you learn everything I know from this article? Clearly not. Thousands of furnaces have been installed during my tenure. However, you will be informed of the procedure.

Step 1:

Make a list of all the tools you’ll need. Nothing is more frustrating than starting a furnace project only to realize you are missing certain essential tools. The majority of the necessary instruments are already in your hands. Examples include screwdrivers, drills, hammers, and other tools. I’ll help you make a list so you have everything you need before you begin working on the furnace installation.

Step 2:

Assess your living situation. You’ll need to understand how your home is built and insulated. Do you have new or ancient windows and doors? Is air escaping into your home from dryer vents, window fans, or other sources? Is your home built on a concrete slab or has a basement? You’ll need to know this in order to install the correct equipment in your home.

Read More:   10 Air Conditioner Tips to Keep Cool Summer

Step 3:

Inspect the ductwork as well as the heating and cooling system. This is the most important step, why? You may be taken aback by the response. Some HVAC contractors could be taken aback. The equipment must be of the right size. Unquestionably.

There are no exceptions to this rule. Why? “Doesn’t the axiom ‘larger is better’ apply in this case?” You could be perplexed. No. No, no

Right now, I’ll give you an example. If your home had an oversized air conditioner, it would only run for a few minutes until the thermostat was set to the correct temperature. Great!

The larger A/C saved me electricity by just running for a short time and quickly lowering the temperature! So, what exactly is the problem? Yes, you quickly cooled your home, but you neglected to eliminate the humidity (water in the air). The longer an air conditioner runs, the more water it takes from the air.

The surplus water in the air makes you feel uneasy in hot weather. The objective is to put you at ease. Cooling the house quickly will have the opposite effect. The same principle applies to a furnace. It must be the proper size. There are a plethora of free online heating and cooling calculators to choose from. Simply go to Google and search in ‘heating and cooling load calculator.’ The majority of the time, instructions are included.

Step 4:

Make a list of the materials you’ll need for ductwork. Keep a running list of the materials you’ll need when you go to the store (for all materials). Perhaps the return should be raised in size. The existing ducting will very definitely need to be connected to the new furnace. The installation instructions for the furnace will tell you what sizes you’ll need for a proper installation.

Read More:   10 Heating System Maintenance Tips For A Cozy Winter

Step 5:

Imagine You’ll be able to determine your new electrical requirements as you analyze your house in step 3. Make a detailed list. Keep in mind that all new furnaces require a ground wire. You’ll need to connect a ground wire to your old power supply if it doesn’t already have one.

Furnace installation process

Step 6:

Make a list of the gas line materials you’ll need. This will also be determined in Step 3. Hopefully, you can see how critical it is to follow this procedure exactly as written. In the long run, making these lists before starting the furnace installation procedure will save you time and work. You won’t be running to 15 different stores on the third day of the installation in minus 10 degrees because you don’t have all of the necessary items on hand, as well as a plan of action.

Step 7:

Create a list of miscellaneous materials. This will be influenced by the type of furnace you have or will acquire. A furnace that is 80% efficient, for example, will require different flue pipe materials than one that is 90% efficient.

Step 8:

Find local furnace installation companies with whom to partner. This may be the most challenging challenge you’ll face. You used to be rather dependent on your neighborhood sellers. You can now connect to the internet. Use it to your advantage.

A Google search for “furnace Goodman” will turn up a surprising number of hits. Always make sure to ask about the warranty. Even if you pay a professional to install it for you, remember that buying your own furnace saves you thousands of dollars!

Step 9:

Turn off the power and the fuel supply to your existing equipment. Yes, I understand, but some individuals skip past this stage and go straight to pulling things up. It’s a mild nudge.

Read More:   5 Things You Didn't Know About Air Conditioners

Step 10:

Make sure your existing ducting is in the right place. Why? Nothing is more demoralizing than starting to remove a furnace only to have the existing ductwork collapse at your feet. This not only extends your workday but also broadens your vocabulary by introducing new four-letter words. As a result, Step 10 entails securing the existing ducting using cleats and screws.

Step 11:

Get rid of any outdated devices. Now that you’ve turned off the furnace’s power and secured your ductwork, you’re ready to start removing the old equipment. Take it out of your workspace and set it aside.

Step 12:

Put everything back together. This section is divided into six subsections. The furnace is in the process of being positioned. You will be able to reduce the amount of labor and ducting necessary if done correctly. Connecting the new furnace’s electrical system return and the boot is two terms for the same thing.

The old plenum (the ducting that leaves the old furnace) is connected to the new furnace. The Transition is the name given to this period.

  • Leak detection and gas line reconnection
  • To evacuate the spent fuel gases, flue pipes are being installed.
  • The thermostat has been reconnected, as has the high-voltage power supply.

Step 13:

Set up and test your equipment. Typically, the manufacturer’s instructions will detail how to turn on and test the new furnace. Follow their recommendations as precisely as possible.

Final Thought:

It’s as simple as that. Twenty years of experience boiled down to 13 easy steps. If you’re thinking of building your own furnace, I hope this information is helpful. This article is for everyone, not just those looking for Scarborough furnace installation.

Scroll to Top