If you find the gasket of the washing machine door slightly sticky to touch, it shows that it is croaking and demands prompt replacement.
Follow the below simple steps to replace the door seal without addressing the repairman.
Step 1: Place the external clamp band plugging the seal to the shell of the machine and analyze it carefully. Most can be cautiously levered off using a thin blade screwdriver while some have a strain full arrangement which needs to be disentangled.
Step 2: On taking out the exterior clamp band, place the inside one procuring the drum seal, and know how it is secured. This can be needed to fluff the band with the help of a thin blade screwdriver.
Step 3: Once the clamp bands are removed, make use of both hands to pull out the seal from fixed lips on the shell and drum.
Step 4: To make the fitting of the new seal easier, rub the fabric conditioner smear into the groove located on the drum.
Step 5: If the clamp band bears no tension in adjustment, first place it to the lower side of the seal then force it on with both the hands operating opposite directions towards the top.