How to Drain Washing Machine?

Last updated on February 14th, 2024 at 10:44 pm

Most people don’t know very well, How to drain washing machines? In this article, we hope you will learn about it step by step in the next few minutes. If washing machines played a vital role in your daily working days as a laundry expert, which saves your time and working stamina and provides extra time to gossip with your friend or made a cake with your kid, you will not think a single moment without it when it is needed.

But properly not draining can be a reason for facing this unpleasant situation. So, draining is essential in any Washing Machine for unbroken washing performance. There can be so many reasons for not spinning it as something is stuck in the washing machine drain hose or pump, or the hoses are jammed, or the pump is broken.

It is not required to call a specialist to do this with the help of some handy kits you can easily do all things which come from the question of “How to drain the washing machine?”

Exact plan about what are you going to do and how you fix it. Set a plan before doing it. One thing more you should be careful about self-injury and massive spills.

How to drain the washing machine follows two different methods for front-loading machine and top-loading. For a modern front-loading washing machine you need to drain the water from a filter located in front of the pump, on the contrary in top lading, you can get it at the end of the removal cylinder under the agitator’s cap.

How to Drain Washing Machine

Few tools and materials are required for this task securely.

The list is given below:

  • Bucket
  • Screwdriver
  • Needle-nose pliers
  • Sponge and towels
  • Clamps.

How to drain washing machine: Solution

At the time of running your washing suddenly it is being stopped. Now time to empty the tub Firstly you turn off the power supply of your machine. Secondly, bring out all the wet cloth from the washer and keep the o a bucket.

After that gather all the water in shallow bowls as you can. Finally, rub out the left water with a sponge or towel. After this comes the inspection section to where the problem in it and what can be a solution to that problem.

Some common but wise steps help you efficiently such as reading the manual of your washer, avoiding electrical shock, grabbing some towels, figuring out where to put the water, and waiting for the water to cool if your last usage was hot water makes your drawing work faster and cleaner.

To complete this solution’s process is presented here step by step. So, read carefully,

Draining a Front-Loading Machine

Locate the drainage filter and open the filter cover:

 A small panel that covers the drainage filter is placed at the bottom of the front of any machine. Firstly you have to find it. Though hinged panels are usual these years and can be easily removed without tools if it is screwed you should use a proper screwdriver to help you.

Unplugging the washing machine from the power supply ensures your safety. So, don’t forget to do it.

Pick up the front of the machine at a few inches height and drain the water :

Find the drain pump filter or drain tube,  and releases excess water then finally follow this processor may need to unscrew this front panel, unclip it, or simply flip it down.

Firstly you have to revolve the lower part of the hose. Look, perfectly is there any damage, repair it. if you find no worn then keep it in the same place., check carefully to the same potion without no kinks. After that unscrew the emergency drain cap by turning it to the left.

Lower the  machine  and clean the filter:

Make sure you did all things securely as drainage water and perfect sealing. now you can give back the machine over the floor, Cleaning filter and rinsing with hot water and a soft-bristle brush are favorable to your washer. Replace the filter and the access panel perfectly.

Don’t be late if you can locate any clogging in the drain pump hose or the drain pump filter whereas the drain hose isn’t kinked call any professional.

Drain a Top-Loading Washing Machine

Turn off the power:

Whether it has been switching the power button or directly Unplugging the washing machine from the power source system.

Find out the drain hose and water supply hoses:

It is required to pull your machine out from the wall and detach the drain hose from the wall for doing net steps smoothly. You should read the manual to be sure is there have to problem shooter 

Then, locate the drain hose after opening the removable panel which is usually found on the back of the washer along with two separate hoses for both cold and hot water supply. And be careful to keep that end of the hose raised higher than the machine itself.

Fill the bucket with water:

Drain the washing machine of water completely by disconnecting the drain hose from the pipe. If you find any blockage in the drain hose, release it. Repeated it until it seems free. Removing a drain pump clog is another foremost step before finishing this task.

If there is no clog in the pipe or hose, you should have a look at the behind it to find a jammed on it or a big clogged. after that, you should check the pump which can be easily found in manuals with a diagram. I there have some leak or damage you should replace it with the same model.

Thus, We believe strongly this discussion can be troubleshooting for your washing machine. If you can recover your washers by following it could be premium for use.

Hope you enjoyed the article and learn How to drain washing machines? Leave a comment below so that we can recognize your opinions.

Sarah Smith
Sarah Smith

I'm Sarah Smith, a good housekeeper, blogger writer. Love to write about housekeeping, cleaning, cooking tips and tricks as well as life hacks related article and share online.

Articles: 493